Touréchaf

Keep hands above the nut T O U R É C H A F : F A L S E W O R K T O W E R W I T H I N T E G R A L S A F E T Y S Y S T E M 6 NT008 - TOURÉCHAF TECHNICAL INFORMATION Assembling and dismantling a 1.50 x 1.50 m tower... Dismantle in the reverse order of assembly... > 4 - Fit 2 access decks and assemble the 2 nd level. > 5 - Fit a 1 st access deck. > 6 - Move up to the next level and fit the 2nd access deck. > 7 - Assemble the 3 rd level. > 8 - Move the 1 st access deck. > 9 - Raise the 2 nd access deck from below. > 10 -The first-level deck can be removed.The upper level can be accessed using the built-in ladder. > 11 - Fit and adjust the adjustable heads. Dismantle in the reverse order. > 1 - Erect the base and level it.Verify the square by pushing a deck into the angle. > 2 - From the inside of the tower, fit the 1st frame diagonally and swivel to lock it. > 3 - Fit the access frame for easy access. Fit a temporary deck level Raise the access decks to their final position so that there is a height of 2.00 m between decks. REQUIREMENTS: > Ensure that the load is evenly distributed on the ground. > Ensure that the base is levelled. > Fit the first level frames from inside the tower. > Fit the trapdoor next to the ladder. > Ensure that the towers are stable. > Centre the load in the fork heads. > Check that the screw jacks are vertical. > Engage the deck securing pins. Two 1.50 m access decks Place the clamp in contact with the stirrup of the standard. NO YES