Touréchaf

ce ce ce ce ce ce ce ce ce ce ce ce ce ce ce ce ce ce ce ce ce ce 18 NT008 - TOURÉCHAF TECHNICAL INFORMATION T O U R É C H A F : F A L S E W O R K T O W E R W I T H I N T E G R A L S A F E T Y S Y S T E M Compatibility with scaffolding... Legend: ce Frame Access frame Ledger Diagonal brace Ledger for wind bracing Diagonal brace for wind bracing Panacier: width 0.20 m Access deck Single standard T he Touréchaf makes it possible, without using tube and coupler systems, to assemble interconnected towers to form blocks and runs. Each 1.00 m high standard must be braced and anchored at both ends in both directions. With respect to the ledger, the diagonal brace is assembled on the side where the deck is parallel to the latter so as to avoid interferences between the hooks of the deck and the diagonal brace. 1.50 1.00 1.50 1.50 1.50 1.00 1.00 1.00 Rules for laying out the components of towers with 6 legs: - At the periphery: 6 frames (of which 2 access frames on the 1 st level, preferably the 1.50 m mesh). - Inside and on all levels: 1 diagonal brace and 1 ledger. >Towers with 6 legs: Rules for laying out the components of towers with 9 legs: - At the periphery: 8 frames (of which 2 access frames on the 1 st level, preferably the 1.50 m mesh). - Inside and on all levels: 1 fixed-height frame, 1 diagonal braces and 3 ledgers. >Towers with 9 legs: 1.50 1.50 1.50 1.00 1.00 1.00 1.50 1.50 1.50 1.00 1.00 1.00 REQUIREMENTS: > Engage the decks securing pins. > Respect the platform unit distribution and the recommendations in their technical information. Install the access frame parallel to an access deck. TIP WARNING: The middle standards must be braced using ledgers and diagonal braces at all levels. ce ce