Touréchaf

> Lifting: The tower has built-in lifting rings so that it can be moved by crane. This operation is easy and safe as the frames forming the tower are secured by the automatic locking system, including the base jack. T heTouréchaf has been specially designed to reduce MSK condi- tions. Standard parts weigh less than 15 kg and are easy to handle. The design makes it easy to lift the tower by crane to reduce the number of times it has to be dismantled and reassembled. The unit weight of standard parts is less than 15 kg to reduce MSK conditions... > Handling: The Touréchaf frame is fitted to a single attachment point from inside the tower. Fitting the decking: 30° max. Lower the deck while leaning on the frame. Tapped base jack ring to lock the screw jack to the tower. There are two handles under the deck so that it can be raised easily. Raise the deck: > Storage: The frames are stored vertically, and right side up so there is no need to bend down to pick them up or turn them over. Ergonomic design ... To make it easier to fit the deck, hold the end in position with the right hand and forearm. First install the 2 hooks under the ladder. 4 levels T O U R É C H A F : F A L S E W O R K T O W E R W I T H I N T E G R A L S A F E T Y S Y S T E M 12 NT008 - TOURÉCHAF TECHNICAL INFORMATION WLL of the ring: 1,250 kg for an angle of 30° max. 5 levels >Access: The 2 access decks form a full decking with every 2.00 m as "scaffold" landings.The ladder compliant with the standard (NF P93-551/AI) is built into the tower and the distance of its bars makes the step less than 30 cm high. > Moving: The towers can be moved on a concrete slab using the special adjustable false- work tower trol- leys and without disturbing the screw jacks. Do not move an isolated tower taller than 4 frames with the adjustable falsework tower trolley. Adjustable falsework tower trolley (600 kg. adm. per trolley) For more information please refer to the use sheet.