Escalib Mills Hexagonal

ESCALIB MILLS HEXAGONAL: MANUAL ASSEMBLY WITHOUT TOOLS FOR WORK SITES WITHOUT A CRANE 9 NT 013 – ESCALIB MILLS HEXAGONAL > 12-Module unit: > Engage the collar with notch in the standard that has a pin. Erect the 2-step modules as instructed on the sticky label. > Repeat until the 12 modules are arranged. 2 mandatory straps ASSEMBLY VIDEO ESCALIB MILLS HEXAGONAL 12-MODULE HANDLING CRADLE Observe the orientation of the modules MillsCom - 22/05/18 - PV Sticky information labels are affixed to the handling cradle. NB: Comply with the general rules for handling and stability. The maximum stacking height on a worksite is considered to be limited by the height that a man standing on the ground can reach to lift: - 2 x 12-module handling cradles, - 3 x accessories handling cradles. To facilitate handling, the handling cradles can be fitted with 4 Plato 200/600 rollers (see p.11). For transport, it is important to observe the number and position of the straps on the handling cradles. All the handling cradles are fitted with lifting rings. >Transporting the Escalib Mills Hexagonal: NB: The handling cradles must be strapped down (2 straps are mandatory) to prevent them from toppling in transit. 2 mandatory straps. Tighten the straps carefully to avoid deforming the aluminium steps. Example of loading an 8 “Escalib Mills Hexagonal ”. Pin Collar with notch