Solution integral safety

THE COMPLETE SOLUTION FOR AN INTEGRAL ASSEMBLY WITHOUT THE FALSEWORK’S AND FORMWORK’S HARNESS MILLS P11 Beam : Secondary aluminium beam... 8 Specifications and load capacity: Mechanical resistance according to NF P 93-322. > Area: 11.54 cm². > Moment of inertia: 162 cm4. > Elasticity modulus: 70,000 MPa. > Permissible bending: 420 daN.m. > Permissible shear: 3,510 daN. > Permissible reaction: 3,950 daN. 1.90 m - 2.90 m - 3.90 m Protective cap 0.11 cm 0.10 cm C L A M P I N G > P11 BEAM Dimensions Code Weight 1.90 m 079931-2 7.1 2.90 m 079932-0 10.9 3.90 m 079933-8 14.6 FORMWORK WI TH I NTEGRAL SAF ETY Possible clamping: The P11s can be integral with other P11 or P1 beams by using a TM screw (500145-8) + clip (500945-1). Protected by a patent: The P11's particular geometry allows the beam to be both wide and light, and it retains its excellent mechanical performance. Removable storage cradle. * Marketed in the summer of 2024. M I L L S PATENTED SYSTEM T he P11 beams allow for safe fitting of the plywood for construction and civil engineering. The beams are installed one against the other: the spacing between them is as such limited to 11 cm. They are light (less than 15 kg), stable and robust as a conventional M20 wooden beam. Advantages: > Safer fitting of the plywood. - Stable beam, 11 cm spacing of the beams. > Gain in productivity: - No spacing control between beams. - No taking-up of the beams facing the joints of the plywood boards. - 11 cm wide: 10% less beams compared to conventional 10 x 10 beams. > Light: - Prevention of MSK conditions. -Weight of the 3m90 beam < 15 kg. > Impact resistant: - Protective caps. - Reinforced wings. M I L L S PATENTED SYSTEM