Solution integral safety

THE COMPLETE SOLUTION FOR AN INTEGRAL ASSEMBLY WITHOUT THE FALSEWORK’S AND FORMWORK’S HARNESS 6 Mills GCC : S AD Falsework Guardrail... A ssociated with the Touréchaf and the P11 or MP3 secondary beams, the Mills GCC makes it possible to assemble and disassemble the formwork with collective protection. The edge guardrail of the future formwork is installed from the falsework towers even before the beams are installed. The operator then installs the primary and secondary beams from the falsework towers. The operator can then fit the plywood in collective safety with the edge guard rail already in place. Changing the legs of the GCC standard is simple to adjust because it depends on the formwork level, not the changing of the screw jacks or the height of the beams. FORMWORK WI TH I NTEGRAL SAF ETY Advantages: > Simple and quick implementation with collective safety. > Adapts to the changing of the adjustable heads of falsework towers according to the altimetric setting of the formwork. >Visual indicator for fast adjustment. > Accepts non-metric spacing between towers. > Unit weights less than 15 kg. > Requires only a hammer. > Legs of the rails and of the standard with anti-dislocation device. > Standard with handrail and finger pinch safety system. > Leg of the standard can be locked for transport. > Meets the requirements of standard EN 13374-A pertaining to temporary peripheral guardrails. > Compatible with wire netting guardrails. > It is possible to create open or closed angles (balcony formwork). 16 levels of adjustment 0m30 Shuttering skin P11 or MP3 beam Primary beam Toeboard 3 models of GCC extendible rails from 1m to 3m GCC extendible standard 2 toeboard blocks for the corners Touréchaf Captive pin Slider for wire mesh barrier 2 toeboard blocks for the wire mesh barrier or toeboard Makes it possible to assemble and dismantle in collective protection a conventional formwork on falsework towers... M I L L S PATENTED SYSTEM